Struct BaseFlange 

pub struct BaseFlange;

Starts a sheet-metal body from a sketch, for the operation B: a solid named base_flange(B), with the sheet-metal rules every later flange and the flat pattern of it follow.

• A sketch’s area becomes a plate thickness thick, from the sketch’s plane along its normal (against it, if flip). Its faces are base_flange(B,plate,a) on the sketch’s plane and base_flange(B,plate,b) across, and the edge of the area swept by piece X of sketch K (c3, c3#1) gives the wall base_flange(B,K,X) and the edges base_flange(B,K,X,a) / base_flange(B,K,X,b) around it.
• A sketch’s chain of lines and arcs becomes a bent strip, its lines flat and every corner between two of them a bend of the inner radius bend_radius — the lines are where the faces would meet if the bends were sharp — every arc, tangent to its lines, a bend of its own radius. The chain is the strip’s A side, the material on its right (seen from the sketch’s normal; its left if flip), and it runs depth along the sketch’s normal. Line c3 of sketch K gives the flat faces base_flange(B,K,c3,a) / (...,b), its edges at either end of the strip base_flange(B,K,c3,start) / (...,end) and where it ends at point p2 base_flange(B,K,c3,p2); the bend at corner p2 is base_flange(B,K,p2,a) / (...,b), the one of arc c4 base_flange(B,K,c4,...).

Every edge E named so has its wall E if it lies on the sheet’s outline, and the vertex it starts at is E,v,a / E,v,b (see crate::thicken).

Trait Implementations

impl Clone for BaseFlange

fn clone(&self) -> BaseFlange

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for BaseFlange

impl Debug for BaseFlange

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for BaseFlange

fn default() -> BaseFlange

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for BaseFlange

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Editable for BaseFlange

const INFO: OperationInfo = <BaseFlange as ::geop_core_editor::part_operation::PartOperation>::INFO

type EditingState = FormState<<BaseFlange as PartOperation>::Session>

What the editor keeps about a step while it is edited, beyond its arguments, starting from the default whenever a step is opened.

fn new_args(context: &Context<'_>) -> Self::Args

The arguments of a new step: sensible defaults, taking the part it is inserted into into account.

fn presentation( context: &Context<'_>, args: &Self::Args, editing: &Self::EditingState, ) -> Form

What the editor shows while the step is edited. Never fails: an editor needs the form most exactly when the arguments do not build, so whatever is wrong is said in it.

fn process_user_event( context: &Context<'_>, args: &Self::Args, editing: &Self::EditingState, event: Event, ) -> (Self::Args, Self::EditingState)

The step’s arguments and editing state after event.

impl ModelOperation for BaseFlange

fn build( model: &mut NamedModel, reader: &Reader<'_>, step: &str, _: &BaseFlangeArgs, ) -> GeopResult<()>

Builds the step step — what everything it makes is named after — into model, reading whatever else it builds on through reader, so the step is rebuilt when that changes.

impl Operation for BaseFlange

const KIND: &'static str = <BaseFlange as ::geop_core_editor::part_operation::PartOperation>::KIND

The name programs store its steps under.

type Args = <BaseFlange as PartOperation>::Args

What a step of the operation is given. It is saved with the program, so it names targets and elements, never holds their internal ids.

fn run(ctx: &mut StepContext<'_>, args: &Self::Args) -> __GeopResult<()>

Declares what the step produces, through ctx (see StepContext::produce): cheap, since it runs in every run. What takes work is done in the makes, which run only when what they read changed.

impl PartOperation for BaseFlange

fn new_args(context: &Context<'_>) -> BaseFlangeArgs

The newest sketch, with the default rules, a unit deep.

fn form<'a>( context: &'a Context<'a>, args: &BaseFlangeArgs, _: &FormState<()>, ) -> EditForm<'a, BaseFlangeArgs>

The sketch, picked; for a chain how deep; whether flipped; and the rules.

const KIND: &'static str = "base_flange"

The name programs store its steps under.

const INFO: OperationInfo

type Args = BaseFlangeArgs

What a step is given. It is saved with the program, so it names targets and elements, never holds their internal ids.

type Session = ()

What the editor keeps while a step is edited besides its arguments and the visuals selected: () for most.

fn run(ctx: &mut StepContext<'_>, args: &BaseFlangeArgs) -> GeopResult<()>

Declares what the step produces, through ctx (see StepContext::produce).

fn begin_event(session: &mut Self::Session)

What the session forgets at the start of every event, before the event is handled: nothing, by default.

fn canvas( context: &Context<'_>, edit: Edit<'_, Self::Args, Self::Session>, event: &CanvasEvent, )

What the pointer or a key did on the canvas: nothing, by default.

impl PartialEq for BaseFlange

fn eq(&self, other: &BaseFlange) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl Serialize for BaseFlange

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for BaseFlange