Crate geop_ops_hole 

Holes and threads, the way a hole wizard makes them: the Hole operation drills simple, counterbored, countersunk and tapped holes at points on a planar face, sized by ISO tables (iso) or by hand, or tapped for an NPT pipe thread (pipe) and reamed to its taper, each a revolved solid cut away (hole); the Thread operation puts an ISO metric or a pipe thread on a round face, straight or tapered, recorded as a cosmetic thread or modelled by sweeping its profile along a helix (thread).

Re-exports

pub use operation::FaceRef;

pub use operation::Hole;

pub use operation::HoleArgs;

pub use operation::HoleCentre;

pub use operation::HoleKind;

pub use operation::PlaneRef;

pub use operation::Standard;

pub use operation::Thread;

pub use operation::ThreadArgs;

Modules

examples

The examples of holes an editor offers: a mounting plate drilled with counterbored and tapped holes, and a block with a pipe port.

iso

ISO metric screw threads and the holes made for them, in millimetres: the coarse series of ISO 261 from M1.6 to M24, with

operation

Hole: drill holes into a planar face at points on it, the way a hole wizard does — simple, counterbored, countersunk or tapped, sized by ISO tables or by hand, or tapped for an NPT pipe thread. Thread: put a thread on a round face, straight or tapered, recorded or modelled.

pipe

American National Standard taper pipe threads, NPT (ASME B1.20.1), from 1/16 to 2 inch, in millimetres: a 60° thread on a cone tapering 1 in 16 on the diameter, so that its radius changes by TAPER per unit of length.

Functions

register

Adds what this crate offers an editor to r: holes and threads.