Crate geop_ops_harness 

Wire harnesses: bundles of wires routed between connectors on placed parts, through clips — the route a tangent-continuous chain of lines and arcs (route), its bends checked against the bundle’s minimum bend radius, the bundle swept along it, and the length to cut every wire to recorded as the part’s target cables — and the Route operation of a program built on it.

Re-exports

pub use cable::Cable;

pub use cable::Cables;

pub use cable::cable;

pub use cable::cables;

pub use operation::Route;

pub use operation::RouteArgs;

pub use operation::RouteEditing;

pub use operation::RouteSession;

pub use wire::Wire;

pub use wire::WireSize;

Modules

cable

A part’s cables, kept as its target cables: what a routed harness is cut from — its wires, each with the length to cut it to — recorded by the step that routed it, for its editor to show. What a bill of materials orders of it is noted on its bundle (see geop_ops_model::solid_notes).

operation

Route: lay a bundle of wires between connectors, through clips.

route

The path a cable takes: through Waypoints, in order, as a chain of straight lines and circular arcs (RoutePath), and what it measures (Measure): how long it is and how tightly it bends.

wire

Wires, and the bundle they make: how thick each is, by its gauge or its diameter, and how thick they are together.

Functions

register

Adds what this crate offers an editor to r: routing cables.